Welcome to Spuhr AB
The Home of Innovation
ISMS - IDEAL SCOPE MOUNT SYSTEM
Extremely sturdy scope mount, with possibility to attach multiple optical accessories directly to the mount. Built-in level. 45-degree split of the rings provides unobstructed view of the knobs.
TRG with a NV mounted and RMR red dot
Protected Burris interface - hood mounted
Protected Burris interface
Example of a picatinny mount
SP-4016 with our leveling key
Scope mount with secondary sight
Picatinny rails in various sizes
Interfaces for different secondary sights
Example of Simrad mount
We customize accessory kits on customer specification
Interfaces for ACI - QD & non QD
Secondary sight & laser side mounted
1 - 12
Prevents damage on scope due to flexing during heavy recoil or rough handling. The snipers rifle and the
spotter’s carbine can have the same mount, enabling the
use of the same or shared equipment and accessories.
The rings are grooved on the inside for a better grip of the
scope and to enable gluing of the scope. The mount
base is milled from a single billet of aluminum.
Innovative solution for indexing the rotation of the scope,
using the included tool/gauge to index the scope correctly
to the mount and gun. This is very important since if the
scope is not properly indexed there will be an unintended
lateral shift of the point of impact whenever the elevation
Traditionally lasers have been mounted on the forend of
the rifle, a solution with drawbacks. For the same reasons
you don’t want your barrel to touch the forend you don´t
want the sights to be mounted on the forend. Our mounting
system have a minimum of seven interfaces for
accessories, and the laser can easily be attached to the
scope mount, providing the advantage of undisturbed
laser and having the weight close to the centre of the gun
instead of forward.
Mounts can be delivered in various tilts. The tilt is clearly
engraved on the mount, in both MIL and MOA.
Accessible and readable dials
The rings are cut at 45 degrees instead of horizontaly,
providing several advantages; the screws holding the parts
together are not obscuring the knobs, thus the shooter
can quickly determine the settings of the knobs.
It also gives the shooter a horizontal reference line helping the shooter subconsciously to avoid canting the rifle to the side.
The rings have index marks on the top and right side, making low knobs more easily readable.
Provides use of various accessories such as angle cosine indicator (ACI), back up sights, lasers, illuminators, night vision mounts etc. with a minimized ”footprint”. With traditional mounts this can only be achieved if there is sufficient space on the middle tube for additional rings, which there rarely is. The Ideal Scope Mount System have interface surfaces directly on the mount, making it possible to mount accessories either by Picatinny rails or as direct interfaces. A selection of interfaces for popular accessories are available, and others can be made to customer specifications.
The sight mount have a level included in the rear of the